Sartorius WZB25-NC - Output Format with 22 Characters (Compatibility with Current Weigh Cells)

34 Weigh Cell Operating Instructions
Operation
8.4 Output Format with 22 Characters

In this case, a 6-character code precedes the 16-character output format.
These six characters identify the subsequent value.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
K K K K K K + * A A A A A A A A * E E E CR LF
* * * * * - . . . . . . . . * * *
* * * * * * * * *
K: ID code character E: Measurement unit characters
* Space CR: Carriage return
A: Displayed characters LF: Line feed
Example
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
N + 1 2 3 . 5 6 * g * * CR LF
Special Operation:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
S t a t * * * * * * * * * * * * * * * * CR LF
H i g h
L o w
C a l . E x t .
* Space High: Overload
Cal.Ext.: Adjustment, external Low: Underweight
Error Message
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
S t a t * * * * * E R R * # # # * * * * CR LF
S t a t * * * * * A P P . E R R** * * * * CR LF
S t a t * * * * * D I S . E R R** * * * * CR LF
S t a t * * * * * P R T . E R R** * * * * CR LF
* Space ### error number
** For cause and solution, please refer to the “Error Codes” section