Operating Instructions Weigh Cells 5
About these Instructions
1 About these
Instructions
1.1 Validity
These instructions are part of the device; they must be
read in full and stored. These instructions apply to the
following versions of the device:
Device Model
Weigh Cells
WZB
WZB25-NC | WZB254-ND |
WZB254-N | WZB254-NC |
WZB653-N | WZB1403-N |
WZB1403-NC | WZB8202-N |
WZB8202-NC
1.2 Related Documents
t In addition to these instructions, please observe the
following documents: Instructions for the associated
devices, e.g., display unit, printer.
1.3 Target Groups
These instructions are addressed to the following target
groups. The target groups must possess the knowledge
specified below.
Target group Knowledge and Qualifications
Operator The operator is familiar with the
device and the associated work
processes. The operator
understands the hazards which
may arise when working with the
device, and knows how to
prevent them.*
* If a person in the target group operates the software
interface of the device, they are also the “user”.
1.4 Symbols Used
1.4.1 Warnings in Operation Descriptions
WARNING
Denotes a hazard that may result in death or severe
injury if it is not avoided.
CAUTION
Denotes a hazard that may result in moderate or minor
injury if it is not avoided.
NOTICE
Denotes a hazard that may result in property damage if
it is not avoided.
1.4.2 Other Symbols Used
t
Required action: Describes activities that
must be carried out. The activities in the
sequence must be carried out in succession.
y Result: Describes the result of the activities
carried out.
[ ] Refers to operating and display elements.
Indicates status, warning, and error
messages.
To Next Page
Loading...
