Sartorius WZB25-NC - Parameter List; Active Setup Menu Menu

22 Weigh Cell Operating Instructions
System Settings
7.9 Parameter List
7.9.1 “Active Setup Menu” Menu
Level 1 Level 2 Level 3 Level 4 Codes
Active setup
menu
Balance Installation site/ambient
conditions
Very stable conditions 1. 1. 1. 1
O Stable conditions 1. 1. 1. 2
Unstable conditions 1. 1. 1. 3
Very unstable conditions 1. 1. 1. 4
Application filter O Final readout 1. 1. 2. 1
Dosing 1. 1. 2. 2
Reduced filter 1. 1. 2. 3
Filter off 1. 1. 2. 4
Stability range/stability 1/4 scale interval/maximum accuracy 1. 1. 3. 1
1/2 scale interval/very accurate 1. 1. 3. 2
1 scale interval/accurate 1. 1. 3. 3
O 2 scale interval/quick 1. 1. 3. 4
4 scale interval/very quick 1. 1. 3. 5
8 scale interval/very low 1. 1. 3. 6
Stability delay Very short 1. 1. 4. 1
O Short 1. 1. 4. 2
Moderate 1. 1. 4. 3
Long 1. 1. 4. 4
Taring Without stability 1. 1. 5. 1
O After stability 1. 1. 5. 2
Autozero O ON 1. 1. 6. 1
OFF 1. 1. 6. 2.
O = Factory setting