Satec System 295 - Page 135

Appendix B Programmable Parameters 127
Table B-1 Setup Parameters
Access
Parameter Description Options Front
panel
Commu-
nications
Extended memory setup
•
Memory partition Selects the memory partition to be
setup
1-19
Number of records Specifies the number of records
for the partition
see Section 2.15
0 = delete
partition
Number of
parameters in the
record
Defines the number of
parameters for a data log record
1 to 16
Partition type Specifies in what manner to
behave when the partition is filled
up
non-wrap/ wrap
around
Programmable Min/Max log setup
•
Register number Selects the programmable
Min/max log register to be setup
1 to 16
Measurement
parameter group
Specifies the parameter group for
the register
Measurement
parameter
Specifies the measurement
parameter to be associated with
the register
Data log setup
•
Data log partition Selects the data log partition to
program the record structure
1 to 16
Parameter number Specifies the parameter number
within the record
1 to 16
Measurement
parameter group
Specifies the parameter group
Measurement
parameter
Specifies the measurement
parameter to be logged
TOU System setup
•
TOU registers allocation
TOU register
number
Selects one of the eight TOU
accumulating energy registers, or
one of the three extreme demand
registers
1 to 11 À