Operating The PM295 51
3.3.15 Timer Setup
Select the t-r entry from the MAIN menu and press ENTER.
The TIMER SETUP menu is shown in the illustration below. The upper window is
the menu label. The central window lists entries for four interval timers, and the
lower window displays the timer interval in seconds for the selected timer. See
Section 4.13 for information on timer operation.
When you enter the menu, the central window is currently active.
1
t-r
t-r 1
To select and view a timer setup:
Ä From the central window, select the desired timer with the
up/down arrow keys. The lower window will display the
current timer interval setting.
To change the timer interval:
Ä Press SELECT to choose the lower window.
Ä Adjust the timer interval with the up/down arrow keys. The applicable range is 0
to 9999 sec. Setting the interval to zero disables the timer run.
Ä Press ENTER to return to the central window.
To quit the menu:
Ä From the central window, press ENTER to return to the MAIN menu.
3.3.16 Real Time Clock Setup
To enter the setup menu, select the rtc entry from the MAIN menu and press ENTER.
The REAL TIME CLOCK SETUP menu consists of 3 sub-menus for viewing and
setting the time, date and day of week. The upper window lists menu entries, the
central and lower windows display the RTC readings.
The RTC sub-menus are shown in the illustrations below. When you enter the RTC
menu, the first active menu is the HOUR menu allowing you to see or change the
current time setting.
To select and view other sub-menus:
Ä From the upper window, select the desired sub-menu with the up/down arrow
keys.
To Next Page
Loading...
Need help?
General
