Satec System 295 - Page 148

140
Appendix B Programmable Parameters
Table B-7 Setpoint Trigger Parameters
Group Parameter Unit Range À Condition
label Label Name
Á
label
th.C3 Current THD L3 % 0 to 100.0
HFc.1 K-Factor L1 1.0 to 999.9
HFc.2 K-Factor L2 1.0 to 999.9
HFc.3 K-Factor L3 1.0 to 999.9
rt.Lo
Real-time low values on any phase
GE/LE/Eq/nE
U Low voltage V 0 to Vmax
cur Low current A 0 to Imax
Ac.P Low kW kW -Pmax to Pmax
rE.P Low kvar kvar -Pmax to Pmax
AP.P Low kVA kVA 0 to Pmax
PF.LG Low power factor lag 0 to 1.00
PF.Ld Low power factor lead 0 to 1.00
thd.U Low voltage THD % 0 to 100.0
thd.C Low current THD % 0 to 100.0
HFc. Low K-Factor 1.0 to 999.9
rt.Hi
Real-time high values on any phase
GE/LE/Eq/nE
U High voltage V 0 to Vmax
cur High current A 0 to Imax
Ac.P High kW kW -Pmax to Pmax
rE.P High kvar kvar -Pmax to Pmax
AP.P High kVA kVA 0 to Pmax
PF.LG High power factor lag 0 to 1.00
PF.Ld High power factor lead 0 to 1.00
thd.U High voltage THD % 0 to 100.0
thd.C High current THD % 0 to 100.0
HFc. High K-Factor 1.0 to 999.9
rt.to
Real-time total values
GE/LE/Eq/nE
Ac.P Total kW kW -Pmax to Pmax
rE.P Total kvar kvar -Pmax to Pmax
AP.P Total kVA kVA 0 to Pmax
PF Total PF -1.00 to 1.00
PF.LG Total PF Lag 0 to 1.00
PF.Ld Total PF Lead 0 to 1.00
rt.Au
Real-time auxiliary measurements
GE/LE/Eq/nE