Satec System 295 - Page 151

Appendix B Programmable Parameters 143
Table B-7 Setpoint Trigger Parameters
Group Parameter Unit Range À Condition
label Label Name
Á
label
U.Unb Voltage unbalance % 0 to 300
C.Unb Current unbalance % 0 to 300
dnd
Present demands
GE/LE/Eq/nE
Ud. 1 Volt demand L1 V 0 to Vmax
Ud. 2 Volt demand L2 V 0 to Vmax
Ud. 3 Volt demand L3 V 0 to Vmax
Ad. 1 Ampere demand L1 A 0 to Imax
Ad. 2 Ampere demand L2 A 0 to Imax
Ad. 3 Ampere demand L3 A 0 to Imax
Ac.bd Block kW demand kW 0 to Pmax
rE.bd Block kvar demand kvar 0 to Pmax
AP.bd Block kVA demand kVA 0 to Pmax
Ac.Sd Sliding window kW demand kW 0 to Pmax
rE.Sd Sliding window kvar demand kvar 0 to Pmax
AP.Sd Sliding window kVA
demand
kVA 0 to Pmax
Ac.td Thermal kW demand kW 0 to Pmax
rE.td Thermal kvar demand kvar 0 to Pmax
AP.td Thermal kVA demand kVA 0 to Pmax
Ac.Ad Accumulated kW demand kW 0 to Pmax
rE.Ad Accumulated kvar demand kvar 0 to Pmax
AP.Ad Accumulated kVA demand kVA 0 to Pmax
Ac.Pd Predicted kW demand kW 0 to Pmax
rE.Pd Predicted kvar demand kvar 0 to Pmax
AP.Pd Predicted kVA demand kVA 0 to Pmax
hd.U1
L1/L12 phase voltage harmonics
GE/LE/Eq/nE
H01-H40 Harmonic H01-H40 % 0 to 100.00
hd.U2
L2/L23 phase voltage harmonics
GE/LE/Eq/nE
H01-H40 Harmonic H01-H40 % 0 to 100.00
hd.U3
L3 phase voltage harmonics
GE/LE/Eq/nE
H01-H40 Harmonic H01-H40 % 0 to 100.00
hd.C1
L1 phase current harmonics
GE/LE/Eq/nE
H01-H40 Harmonic H01-H40 % 0 to 100.00