Table B-7 Setpoint Trigger Parameters
Group Parameter Unit Range À Condition
label Label Name
Á
label
Ar.Lo
Average low values on any phase
GE/LE/Eq/nE
U Low voltage V 0 to Vmax
cur Low current A 0 to Imax
Ac.P Low kW kW -Pmax to Pmax
rE.P Low kvar kvar -Pmax to Pmax
AP.P Low kVA kVA 0 to Pmax
PF.LG Low power factor lag 0 to 1.00
PF.Ld Low power factor lead 0 to 1.00
thd.U Low voltage THD % 0 to 100.0
thd.C Low current THD % 0 to 100.0
HFc. Low K-Factor 1.0 to 999.9
Ar.Hi
Average high values on any phase
GE/LE/Eq/nE
U High voltage V 0 to Vmax
cur High current A 0 to Imax
Ac.P High kW kW -Pmax to Pmax
rE.P High kvar kvar -Pmax to Pmax
AP.P High kVA kVA 0 to Pmax
PF.LG High power factor lag 0 to 1.00
PF.Ld High power factor lead 0 to 1.00
thd.U High voltage THD % 0 to 100.0
thd.C High current THD % 0 to 100.0
HFc. High K-Factor 1.0 to 999.9
Ar.to
Average total values
GE/LE/Eq/nE
Ac.P Total kW kW -Pmax to Pmax
rE.P Total kvar kvar -Pmax to Pmax
AP.P Total kVA kVA 0 to Pmax
PF Total PF -1.00 to 1.00
PF.LG Total PF Lag 0 to 1.00
PF.Ld Total PF Lead 0 to 1.00
Ar.Au
Average auxiliary measurements
GE/LE/Eq/nE
Au.C Auxiliary current mA/A 0 to Iaux max
nEU.C Neutral current A 0 to Imax
FrEq Frequency  Hz 0 to 100.0
To Next Page
Loading...
