Satec System 295 - Page 156

148
Appendix B Programmable Parameters
Table B-7 Setpoint Trigger Parameters
Group Parameter Unit Range À Condition
label Label Name
Á
label
Ac.Sd Sliding window kW demand
rE.Sd Sliding window kvar demand
AP.Sd Sliding window kVA
demand
Ac.td Thermal kW demand
rE.td Thermal kvar demand
AP.td Thermal kVA demand
Hi.PG
Programmable Min/Max maximum registers
nEU
rG.01-
rG.16
Programmable Min/Max
register #1 - #16
tOU
TOU System parameters
GE/LE/Eq/nE
tArF Active tariff tF01 - tF16
ProF Active profile Pr01 - Pr16
Lt.Ac
New TOU System minimum kW demands
nEU
tF01 -
tF16
Tariff #1 - #16
Lt.rE
New TOU System minimum kvar demands
nEU
tF01 -
tF16
Tariff #1 - #16
Lt.AP
New TOU System minimum kVA demands
nEU
tF01 -
tF16
Tariff #1 - #16
Ht.Ac
New TOU System maximum kW demands
nEU
tF01 -
tF16
Tariff #1 - #16
Ht.rE
New TOU System maximum kvar demands
nEU
tF01 -
tF16
Tariff #1 - #16
Ht.AP
New TOU System minimum kVA demands
nEU
tF01 -
tF16
Tariff #1 - #16
À The display window resolution is 7 digits. The limits are as follows:
Vmax (660 V input option) = 660 [V] @ PT ratio = 1.0 and Vmax = 144 × PT
ratio [V] @ PT ratio > 1.0
Vmax (120 V input option) = 144 × PT Ratio [V]
Imax = 1.2 × CT primary current [A]