Satel GSM-X User Manual

8 GSM-X SATEL
 remote programming of the control panel from a computer with DLOADX program installed
(with a fast data transfer due to GPRS),
 remote management of the alarm system from a computer with GUARDX program
installed (with a fast data transfer due to GPRS).
If communication with the GSM module is to be effected through the RS-232 port, the
local programming function in the INTEGRA / INTEGRA Plus control panel must be
disabled.
Fig. 4. Module working in conjunction with the INTEGRA / INTEGRA Plus control panel.
3.5 Work in conjunction with STAM-2 monitoring station
When connected to the STAM-2 monitoring station, the module makes it possible to receive
event codes sent in the form of SMS or CLIP. The module also enables the monitoring
station to send SMS messages.
Fig. 5. Module working in conjunction with the STAM-2 monitoring station.

Satel GSM-X Specifications