Satel GSM-X User Manual

SATEL GSM-X 3
1. Introduction
This manual describes the GSM-X module and how it should be installed as well as
configured using the GX Soft program. Described herein is also the GSM-X-ETH Ethernet
module, which is an optional component of the GSM-X module.
2. Features
Communication
 Built-in GSM telephone designed for use in the 850 / 900 / 1800 / 1900 MHz cellular
networks.
 Dual SIM support (nano-SIM).
 Possibility to remotely check the account balance and validity of the SIM card installed in
the module.
 Possibility to define the MCC / MNC code of the operator of network into which the module
is to log in.
 Possibility to expand GSM-X with the GSM-X-ETH module to add Ethernet link.
GSM gateway
 Simulation of analog telephone line by using GSM connection:
 Tone dialing (DTMF).
 Information on the caller number (CLIP FSK or DTMF).
 Changing voltage polarity on the telephone line output when making phone connections
(individual connection billing option).
 Possibility to generate routing signal.
 Possibility to work as a backup communication path for analog telephone line.
 Filtering capability for connections made via module GSM phone.
 Possibility to send SMS messages from telephone connected to the telephone line output.
Reporting
 Reporting events to two monitoring stations.
 Several communication formats:
 SIA,
 Contact ID (CID),
 Ademco Express,
 Sil. Knight / Ademco slow,
 Radionics 1400Hz,
 Radionics 1400 with parity.
 Multiple transmission paths:
 GPRS,
 GSM voice channel,
 SMS messages,
 Ethernet network (using GSM-X-ETH module).
 Defining priority for different paths of event reporting.

Satel GSM-X Specifications