48 GSM-X SATEL
When being sent, the DTMF tones may get corrupted, thus impeding control.
Construction of some telephones requires activation of the DTMF control function.
7.15 CLIP control
You can control the module outputs by using the CLIP service.
Fig. 39. “CLIP control” tab.
Any telephone
You can program how the module outputs are to be controlled by using the CLIP service from
any phone number.
The numbers from the “Additional telephone numbers” list and the users' telephone
numbers are not treated by the module as any telephone numbers.
Users
You can program how the module outputs are to be controlled by using the CLIP from the
users' telephones (see “Users” p. 52).
Additional telephone numbers
You can program how the module outputs are to be controlled by using the CLIP from
additional phone numbers.
Telephone number [Filter…] – enter the phone number or part of it to filter the list.
To Next Page
