Satel GSM-X - GX Control Application

54 GSM-X SATEL
Date – date the event occurred in the module / event from the control panel was saved to the
module memory (see “Events buffering” p. 37).
Time – hour the event occurred in the module / event from the control panel was saved to the
module memory (see “Events buffering” p. 37).
Description – event description (for events in Contact ID or SIA format).
Source – name of source that generated the event.
Station 1 / Station 2 – reporting status:
[blank field] – event is not reported,
. – event waiting to be sent to the monitoring station,
+ – test transmission sent to the monitoring station,
- – sending test transmission has failed,
* – sending event cancelled (e.g. reporting has been disabled),
[name of reporting path] – event sent successfully to the monitoring station using the
given transmission path.
8. GX Control application
The GX Control is a mobile application that allows you to remotely operate GSM-X and
GPRS-A module, i.e.:
 check the status of inputs and outputs,
 block / unblock the inputs,
 control the outputs,
 view the troubles,
 view the event log.
Additionally, the application can provide information on the events by using push
notifications.
Communication between the application and the module is encrypted.
Number of the telephone with GX Control application must be programmed in the
module in the list of users' telephones (see “Users” p. 52).
You can download the application from the internet stores: “Google play” (Android system
devices) or “App Store” (iOS system devices).
When the application is run for the first time, a prompt is displayed asking you whether
access to the application is to be password protected. After you define the application access
rules, a tutorial will be displayed to prompt you what to do to configure settings for
communication with the module. For a new module, the settings can be configured
automatically, or you can enter them manually. Fig. 44 shows the GX Control screen that
allows you to select how the communication settings are to be configured.