Satel GSM-X User Manual

4 GSM-X SATEL
 Dual Path Reporting compliant with EN 50136 (requires GSM-X-ETH module to be
connected).
 Converting and retransmitting codes of events received from other devices (simulation of
telephone monitoring station).
Messaging
 Notification of events related to the module and received from other devices.
 8 telephone numbers to be notified.
 Notification by using:
 voice messages,
 SMS messages,
 push messages (provided that GX Control application is installed on the user phone),
 CLIP (toll-free).
 Programming voice messages from the GX Soft program.
 Capability of converting the PAGER type text messages into SMS messages.
Event log
 Capability of storing up to 500 events generated by the module or received from
the control panel.
Inputs
 4 programmable inputs (NO, NC).
 Supervising the state of external devices.
 Input blocking capability.
Outputs
 4 programmable OC type outputs.
 Controlling external devices or signaling troubles.
Control
 Control of outputs or blocking of the module inputs by means of:
 inputs,
 telephone keypad (DTMF),
 SMS messages,
 GX Soft program,
 GX Control application,
 CLIP (only outputs control).
 Capability of determining the telephone numbers authorized for DTMF, SMS or CLIP
control.
Work in conjunction with INTEGRA / INTEGRA Plus control panels
 GSM network as the primary or backup communication path.
 Transmitting event codes to the monitoring station via GSM or Ethernet (optionally, after
installation of the GSM-X-ETH module).
 Messaging via GSM network.
 Remote programming of the control panels from a computer with DLOADX program
installed (quick data transfer via GPRS).

Satel GSM-X Specifications