50 GSM-X SATEL
Server address from SMS – if this option is enabled, the address of computer with
GUARDX program and the port number can be entered in the SMS message that initiates
the connection. If the message contains no address or port number, the module will use
the preprogrammed settings.
Fig. 40. “Data forwarding” tab.
Communication: INTEGRA – DLOADX
Server address – the address of the computer with the DLOADX program, with which the
module (connected to the INTEGRA / INTEGRA Plus control panel through RS-232 port)
is to communicate using the TCP/IP communication protocol (GPRS or Ethernet). You can
enter the IP address or domain name.
Port – the number of port on which the communication with the DLOADX program will take
place.
DLOADX key – the string of 12 alphanumeric characters (digits, letters and special
characters) used for data encryption during communication with DLOADX program. The
module will only establish connection to the program using the correct key.
Encrypt transmissions – if this option is enabled, the data transfer between module and
program will be encrypted. The option must be enabled.
Server address from SMS – if this option is enabled, the address of computer with DLOADX
program and the port number can be entered in the SMS message that initiates the
connection. If the message contains no address or port number, the module will use the
preprogrammed settings.
To Next Page
