SATO CL6NX - Page 156

6 Installation of Options
154
CL4NX/CL6NX Service Manual
15 Connect the RFID signal cable  from
the RFID PCB assembly
 to the
EXT PCB
*.
Connect the connector with a looped wire to the
EXT PCB
* as shown.
16 Connect the antenna wire # to the
RFID PCB assembly
.
17 Attach the front covers 1and / to the
printer using two screws
$.
Slide in the arrow direction to attach the
front covers.
17
21
23
12
4
5
3