SATO CL6NX - Page 41

4 Checking and Performing Printer Adjustments
39
CL4NX/CL6NX Service Manual
6 Press the /// buttons to select the
number. And then press the button to
enter the number to the password text box.
The password for the Service menu is 6677.
7 Press the right soft button to verify the
password and goes to the next screen.
The Service menu shows.
8 Press the / buttons to select Reset
and then press the button.
The Reset screen shows.
9 Press the / buttons to select Counters
and then press the button.
10 Press the / buttons to select the
counter you want to reset.
•Select Head to initialize the head counter. You
have to initialize each time you replaced the print
head.
•Select Cut to initialize the cutter counter. You
have to initialize each time you replaced the
cutter.
11 Press the right soft button or button to
perform initialization.
The confirmation screen shows.
12 Press the left soft button to cancel or right soft button to perform the initialization.