EasyManuals Logo

SATO CL6NX Service Manual

SATO CL6NX
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
4 Checking and Performing Printer Adjustments
49
CL4NX/CL6NX Service Manual
6 Press the / buttons to select the types
of test print and then press the button.
The options are as follows.
Factory: Perform the factory test print.
Configuration List: Print the configuration
information of the printer.
Configure QR: Print the configuration information
with a QR code.
Paper Sensor: Print the detection result of the
media sensor level.
7 Press the / buttons to select the item
you want to set. Then press the /
buttons to change the value.
You can set the following items.
Label Length (not available for Factory test print)
•Pitch
•Offset
Darkness Adjust
Refer to Chapter 4 Operation and Configuration
of the CL4NX/CL6NX operator manual for more
details.
8 Press the right soft button to start the test
print.
Press the right soft button again to pause the print.
To stop the test print, first pause the print and then press the button.

Table of Contents

Other manuals for SATO CL6NX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SATO CL6NX and is the answer not in the manual?

SATO CL6NX Specifications

General IconGeneral
Flash memory2000 MB
Storage mediaFlash
Internal memory256 MB
Built-in barcodesCode 39, Code 93, Code-128 Codabar Library, EAN13, EAN8, GS1 DataBar, Industrial 2/5, Interleaved 2/5, Matrix 2/5
Internal storage capacity2 GB
Cables includedAC
Maximum roll diameter220 mm
Maximum printing width167.5 mm
Printing media thickness0.08 - 0.268 µm
USB portYes
USB connectorUSB Type-A / USB Type-B
Bluetooth version3.0
Serial interface typeRS-232C
USB 2.0 ports quantity2
Connectivity technologyWired & Wireless
Wi-FiNo
Display typeLCD
Product colorBlack
Display diagonal3.5 \
Display resolution320 x 240 pixels
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)30 - 90 %
Operating relative humidity (H-H)30 - 80 %
TypePOS printer
Print speed10 ips
Print technologyDirect thermal / Thermal transfer
Maximum resolution203 x 203 DPI
Weight and Dimensions IconWeight and Dimensions
Depth457 mm
Width338 mm
Height321 mm
Weight20000 g

Related product manuals