SATO FX3-LX Driver Manual

4
Before You Start
A printer driver is software that sends data created on a computer (documents and illustrations) to the
printer and print it on a label. The FX3-LX Printer Driver Manual (hereinafter, "this manual") describes
how to obtain and install the printer driver for the FX3-LX. It also describes how to configure various
settings after installing the printer driver, and how to uninstall and update the printer driver.
Printer Driver Screenshots Used in This Manual
This manual mainly uses screenshots of the printer driver for FX3-LX captured on Windows 10.
Therefore, the screen layout may differ depending on the OS that you are using.
Printer Driver Version Used in This Manual
This manual uses printer driver version 7.8.01.13384. Note that the screen layout may differ
depending on the version of the printer driver.
Limitation of Liability
Specifications and contents in this manual are subject to change without notice.
Trademarks
 SATO is a registered trademark of Sato Holdings Corporation.
 Wi-Fi
®
is a registered trademark of Wi-Fi Alliance.
 Windows is a registered trademark of Microsoft Corporation in the United States and/or other
countries.
 Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
 All other trademarks are the property of their respective owners.
Copyrights / Other Matters
Any unauthorized reproduction of the contents of this document, in part or whole, is strictly prohibited.
First Edition February 2018
© 2018 SATO Corporation. All rights reserved.

SATO FX3-LX Specifications

General

Cutter	Yes
Certification	EN55032, EN55024, EN61000-3-2 / 3-3, EN300 330-2 / -1, EN301 489-1 / -3 / -17, FCC Part15 Subpart B, ICES 003 UL60950-1, CSA C22.2 No.60950-1, IEC/EN60950-1 FCC Part15 Subpart C/E, ISED RSS-Gen, ISED RSS-247, EN 300 328, EN 301 893
Built-in barcodes	AZTECCODE, CODABAR (NW-7), Code 128 (A/B/C), Code 39, Code 93, Data Matrix, EAN13, EAN8, GS1 COMPOSITE, GS1 DataBar, GS1-128, Industrial 2/5, Interleaved 2/5, Matrix 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E
Built-in RFID module	No
Maximum resolution	- DPI
Maximum print height	500 mm
Maximum printing width	80 mm
Battery voltage	14.4 V
AC input voltage	100 - 240 V
Battery capacity	1950 mAh
AC input frequency	50 / 60 Hz
Suitable for use in country/location	Europe
Sustainability certificates	ENERGY STAR
Display	LCD
Control type	Touch
Product color	White
Display diagonal	7 \
Display resolution	480 x 800 pixels
International Protection (IP) code	IPX2
Wi-Fi standards	802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version	4.1
USB 2.0 ports quantity	4
Connectivity technology	Wired & Wireless
Media thickness	0.14 - 0.19 mm
Maximum roll diameter	105 mm
Storage temperature (T-T)	-5 - 60 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	30 - 90 %
Operating relative humidity (H-H)	30 - 75 %
Cables included	AC
Quantity per pack	1 pc(s)
Languages support	Multi

Weight and Dimensions

Depth	225 mm
Width	132 mm
Height	180 mm
Weight	3000 g