SATO FX3-LX - Features of the Product

9
Connecting via LAN cable
Power off the printer. 1.
Connect the LAN cable to the printer. 2.
Connect the LAN cable to the connector shown in the figure.
Connect the LAN cable according to your network environment. 3.
Configure the network settings. 4.
For details of the network settings, refer to "FX3-LX Operator Manual."
Connecting via wireless LAN or Bluetooth (when the optional wireless LAN/Bluetooth kit is installed)
Check whether the wireless LAN/Bluetooth kit is installed to the printer.
For details of installing the LAN/Bluetooth kit, refer to "FX3-LX Options Installation Manual."
For details of the wireless LAN network settings, refer to "FX3-LX Operator Manual."