ERECTION AND DISMANTLING
32
V23C_09.13
SC4000 Pos 4
Drawing 4.28. Assembly of the hinge-
halves to middle the platform.
Drawing 4.29. Assembly of the steering cable.
1
1
7.
After the needed length has been
achieved, assemble the oppo site
hinge-halves (1) to the middle plat-
form section and to the basic plat-
form section of the other unit. Drive
then the other unit to wards the unit
with already mounted middle sec-
tions till the hinge halves go to gether
and can be locked with pins. See
drawing 4.28. Note that the plat form
lev elling device goes to its place.
8. Support the other work platform with
outriggers as per point 3.
9. Assemble the steering cable ac-
cording to drawing.
ADAPTER
ADAPTER
+OP2
+OP2
To Next Page
Loading...