ERECTION AND DISMANTLING
33
SC4000 Pos 4
V23C_09.13
10. Assemble the next mast section onto
the left and the right side basic
mast sections and screw in with four
screws per mast section.
11. Assemble the levelling rod No. 4.
(drawing 4.30) so that the pin on
the lever No 3 will t to the plate
opening on the hinge-half of the last
mounted middle platform section.
Drawing 4.30. Levelling device - levelling rod (4).
V200076
3
5
4
B
A
(PLEASE NOTE THAT THIS HINGE HALF
WITH OPENING FOR THE PIN ON
THE LE VER OF THE LEV ELLING SYS-
TEM IS ON ONE MIDDLE PLAT FORM
SECTION ONLY).
!
To Next Page
Loading...