ERECTION AND DISMANTLING
21
SC4000 Pos 4
V23C_09.13
4. Screw the platform sections symmetri-
cally to each other by using a spe-
cial tool which has been de signed
for platforms assembly. Use only
screws de liv ered by the manu fac-
turer. Tighten the screws 195 Nm.
Drawing 4.11. Assembly of platform sections.
00-0994-603-2
20-140295-1
Drawing 4.12. Use of special tool.
SEE LOADING TABLES (CHAPTER 3).
00-0994-601-1
NOTE: THE RAILINGS SHALL ALSO BE
ASSEM BLED, SO THAT THE WHOLE
PLAT FORM IS SURROUNDED BY
RAILINGS.
Platform section can be used also as
a side platform. Use only screws de-
liv ered by the manu fac turer. Tighten
the screws 195 Nm.
ALWAYS
USE
MOUNTING
SUPPORT
UNDER
PLATFORM
SECTION!!
To Next Page
Loading...