2 Introduction
2.1 Version overview
Page 10
Art. no.: 2.510474 rev.: d
ARGUS LCM/PLUS
2 Introduction
The ARGUS LCM/PLUS (Low Weight and Compact Monitor) is a flexible patient
monitoring device for the comprehensive monitoring of vital parameters in adults,
children and neonates.
Mains power supply (115/230 VAC) is used for stationary use. The LCM also pro-
vides full vital data monitoring during transport with the built in battery (one hour),
or using a DC voltage supply (11 - 30 VDC).
2.1 Version overview
2.1.1 ARGUS LCM (basic) from serial number 781.000-781.999
The following table shows the equipment of the ARGUS LCM. This basic device can-
not be upgraded.
2.1.2 ARGUS LCM (basic) from serial number 781.1000 and higher
The ARGUS LCM BASIC with the microprocessor MK19-11 has a new ECG amplifier
(3p). It is now possible to to display 6 leads with a 3p-lead cable. The 3p-lead cable
is marked with a black connector housing instead of green.
This works only with software 1.24 and higher.
ARGUS LCM ECG SpO
2
NIBP
Basic device Only with 3 leads/display one lead (II) x x
Options: printer, additional battery (can be updated in the field)
ARGUS LCM version
a
ECG
SpO
2
NIBP Respiration Temperature etCO
2
IBP
Axxxx1x
B x x x x 1x x
Dxxxx1xx
E x x x x x x
a
Monitoring amplifier only with 3p- and 5 lead cable (6 or 7 lead display)
Options for all versions: printer, additional battery and nurse call or vehicle power supply
Version A can be updated with etCO
2
module, printer and additional battery.
Version B/C/D/E can be updated with printer and additional battery
To Next Page
Loading...
