Schiller ARGUS LCM PLUS - Setting Loudness of Audible Alarm and QRS Sound

3Operation
3.4 Initial settings
Page 20
Art. no.: 2.510474 rev.: d
ARGUS LCM/PLUS
Printing alarm limits
3.4.5 Setting loudness of audible alarm and QRS sound
1. Press the alarm limit button.
2. Press the print button. The displayed table is printed.
1. Select normal monitor mode. Press menu if in programming mode or trend if in
trend display.
2. Press the left button to adjust the loudness. The pictogram in the status display
on the bottom left shows the current setting.