Need help?Do you have a question about the Schmalz SCPSi and is the answer not in the manual?
General| Control valve | Integrated |
|---|---|
| Protection type IP | IP65 |
| Integrated functions | Vacuum generation, monitoring |
| Electrical connection | Plug M8, 4-pin |
| Material | Aluminum |
| Operating temperature range | 0°C to +60°C |
Provides guidance on document usage, notes on operating phases, and target audience.
Details the location and content of the product's permanent identification label.
Outlines requirements for personnel operating or maintaining the ejector, emphasizing qualifications.
Highlights potential hazards and necessary precautions to avoid injury or damage.
Illustrates the physical structure of the ejector with numbered components.
Explains the functionality of the display and control buttons on the ejector.
Lists the default parameter values set at the factory for the ejector.
Presents performance specifications like max vacuum, suction rate, and air consumption.
Describes the procedure for enabling access to the ejector's configuration menus.
Introduces the main menu for configuring standard ejector applications.
Provides essential instructions and safety precautions for safe installation.
Details the electrical connection requirements and pin assignments for the ejector.
Explains how to configure the ejector for IO-Link communication.
Shows typical vacuum process cycles, including EPC measured values.
Stresses the importance of qualified personnel and safety measures during maintenance.
Guides on replacing the silencer insert and its potential impact on performance.
To Next Page
