Schmalz SCPSi - Page 55

To Next Page

To Previous Page

9 Installation

EN-US · 30.30.00.00424 · 07 · 10/23 55 / 86

For example, when using Siemens components, the IODD for the ejector is displayed as follows in the pro-

gram S7-PCT:

Main Page

Table of Contents3
Important Information6
Note on Using this Document6
The Technical Documentation Is Part of the Product6
Type Plate6
Symbols7
Fundamental Safety Instructions8
Intended Use8
Non-Intended Use8
Personnel Qualification8
Warnings in this Document9
Residual Risks9
Modifications to the Product10
Product Description11
Ejector Designation11
Ejector Structure11
Display and Operating Element in Detail12
Technical Data14
Display Parameters14
General Parameters14
Electrical Parameters14
Factory Settings15
Performance Data16
Dimensions17
Pneumatic Circuit Plans18
Operating and Menu Concept22
Enabling the Menu22
Main Menu22
Configuration Menu23
System Menu24
Individual Functions25
Operating Modes26
SIO Operating Mode26
IO-Link Operating Mode26
General Description of Functions29
Applying Suction to the Workpiece/Part (Vacuum Generation)29
Depositing the Workpiece/Part (Blowing Off)30
Operating Modes31
Vacuum Monitoring32
Control Function32
Blow off Functions34
Changing the Blow-Off Flow Rate on the Ejector34
Monitoring the Supply Voltages35
Evaluating the Inlet Pressure35
Calibrating the Vacuum Sensor35
Signal Output36
Control of the Ejector Variants36
Vacuum Unit37
Switch-Off Delay38
ECO Mode38
Write Protection38
Resetting to Factory Settings39
Counters40
Displaying the Software Version40
Displaying the Part Number40
Displaying the Serial Number41
Production Setup Profiles41
Error Display41
Energy and Process Control (EPC)42
Transportation and Storage48
Checking the Delivery48
Installation49
Installation Instructions49
Mounting49
Pneumatic Connection50
Electrical Connection52
Configuring (IO-Link)54
Start of Operations56
Operation58
Safety Instructions for Operation58
General Preparations59
Typical Suction Cycles59
Help with Faults62
Warnings and Errors63
Error Messages in SIO Operation63
System Status Light in IO-Link Mode63
Warnings and Error Messages in IO-Link Mode63
Error Messages in IO-Link Mode64
Maintenance65
Safety Instructions65
Cleaning the Product65
Replacing the Silencer Insert65
Replacing the Press-In Screens65
Replacement of the Device with a Parameterization Server66
Warranty67
Spare and Wearing Parts68
Accessories69
Decommissioning and Disposal70
Disposing of the Product70
Materials Used70
Declarations of Conformity71
EC Conformity71
UKCA Conformity71
Attachment72
Overview of the Display Codes72
Scpsi_V2 Data Dictionary 21.10.01.00065_02 2014-08-29.PDF72

Schmalz SCPSi - Page 55

Table of Contents

Related product manuals