SDMO R33C3 - Maintenance Schedule; Table 7-1 MAINTENANCE SCHEDULE

7-2
Chapter 7 MAINTENANCE SCHEDULE
Maintenance schedule
Table 7-1 Maintenance schedule
Interval and Service item Page
Every 50 service hours
Fuel tank - Drain water 8-2
Air cleaner - Check 8-14
First 50 service hours for
a new or overhauled
engine
Engine oil and Oil filter - Replace 8-8
Bolts and nuts on the engine - Retighten *
Every 250 service hours
Engine oil and Oil filter - Replace 8-8
Belt and belt tension - Inspect and Adjust 8-3
Radiator fins - Check and Clean 8-13
Add grease to link joints, etc. *
Every 500 service hours
Fuel filter (in-line type fuel injection pump) - Replace 8-6
Fuel system (distributor type fuel injection pump) - Bleed air 8-5
Valve clearance - Inspect *
Cleaning the fuel tank (Every 500 service hours or Every 1 years) *
Checking glow plug *
Every 1000 service hours
Starter - Inspect 8-18
Alternator - Inspect 8-18
Bolts and nuts on the engine - Retighten *
Every 1500 service hours Nozzle tip - Clean *
Every 3000 service hours
Fuel injection nozzle - Check and Clean *
Turbocharger - Inspect 8-14
Every 2 years Coolant - Change 8-11
As required Pre-cleaner - Clean, Inspect and Replace 8-15
Air cleaner element - Clean, Check and Replace 8-16
Fuel filter - Drain water 8-3
Fuel system (in-line type fuel injection pump) - Bleed air 8-4
Fuel system (distributor type fuel injection pump) - Bleed air 8-5
Specific gravity of battery electrolyte - Check 8-17
155/242