SDMO R33C3 - Display of Messages in Zone 4

Screen No. Picto
g
rams Data displa
y
ed
P10
Fuel Level Indication
Battery Voltage indication
Battery Ammeter Indication
P11
Total Reactive Power Indication
Alternator U12 compound Voltage Indication
Total Active Power Indication
Alternator Frequency Indication
Order of appearance of screens based on the type of network with the genset started.
Type of line
Order of appearance 3P+N 3P 2P+N 1P+N
1
P3 if genset started
P11 if genset
coupled
P3 if genset
started
P11 if genset
coupled
P3 if genset started
P11 if genset
coupled
P3 if genset started
P11 if genset
coupled
2 P4 P4 P6 P7
3 P5 P8 P8 P9
4 P8 P9 P9 P2
5 P9 P2 P2 P10
6 P2 P10 P10
7 P10
The screen is changed using the scrolling and validation wheel.
When the wheel is turned clockwise, the screens scroll upwards and backwards.
The screens scroll in a loop.
Example: in a 3P+N network after screen 7, then screen 1 and in reverse.
6.3.1.6. Display of messages in zone 4
The graphic zone (zone 4) is used to display messages relating to the generating set's operation. These messages are as follows:
Initialisation of the TELYS
Screen No. Screen Data displa
y
ed
G 1
Initialisation of the TELYS when switching on and/or
when loading a configuration
G 2
SERIAL No.: 08030010000
SOFTWARE: 6.1.0
NOMINAL VOLTAGE: 400V
FREQUENCY: 50Hz
NOMINAL KW: 320kW
EARTH SYSTEM: TNS
Generating set serial number
TELYS software version
Alternator nominal voltage
Alternator nominal frequency
Nominal active power
Neutral speed
Bar graph indicating the screen display time
71/242