SDMO R33C3 - Figure 14: Points Used for Lifting and Moving; Fork Lift Truck; Moving the Generating Set

4.1.3.2. Fork lift truck
1. Position the arms of the forklift truck in the forklift pockets (no. 2).
2. Lift the equipment, handling it gently.
3. Set down the generating set in its unloading position.
Figure 14 : Points used for lifting and moving
4.1.4 Moving the generating set
Whenever moving the generating set, ensure suitable equipment is used (e.g. sling, forklift, etc.) and identify those parts on the
generating set which can be used to move it:
- lifting eye (no.1);
- forklift grooves (no.2);
- tow bar (no.3).
1
3
3
2
37/242