MENU
9. Options
9.1. Dual frequency
This operation must be carried out by a qualified electrician.
These operations must only be carried out when the generating set is stopped, until you are instructed
to start up the generating set.
IMPORTANT
• Close the battery isolating switch to turn on the TELYS 2.
• Turn the supply switch of the TELYS 2 to the "ON" position.
• Press the "MENU" key.
• Using the knob, select "3 SETTINGS" and press the knob to
confirm.
MENUS
3/4
1 ACTIONS
2 INFORMATION
3 SETTINGS
4 COUNTRY
12 OK Esc
To Next Page
Loading...
