SDMO R33C3 - Page 199

3
INSTALLATION AND MAINTENANCE
LSA 42.2 - 2 & 4 POLE
ALTERNATORS
3433 en - 2010.10 / g
LEROY-SOMER
1 - RECEIPT
1.1 - Standards and safety measures .................... 4
1.2 - Checks ........................................................... 4
1.3 - Identication .................................................. 4
1.4 - Storage .......................................................... 4
1.5 - Applications ................................................... 4
1.6 - Contraindications to use................................. 4
2 - TECHNICAL CHARACTERISTICS
2.1 - Electrical characteristics ................................ 5
2.2 - Mechanical characteristics ............................ 5
3 - INSTALLATION - COMMISSIONING
3.1 - Assembly ....................................................... 6
3.2 - Inspection prior to rst use ............................. 6
3.3 - Electrical diagram .......................................... 7
3.4 - Commissioning .............................................. 9
3.5 - Setting up ....................................................... 9
4 - SERVICING - MAINTENANCE
4.1 - Safety measures .......................................... 10
4.2 - Regular maintenance ................................... 10
4.3 - Fault detection ............................................. 10
4.4 - Mechanical defects .......................................11
4.5 - Electrical faults ..............................................11
4.6 - Dismantling, reassembly .............................. 13
4.7 - Characteristics table ................................... 15
5 - SPARE PARTS
5.1 - First maintenance parts ............................... 16
5.2 - Description of bearings ................................ 16
5.3 - Technical support service ............................. 16
5.4 - Exploded view, parts list ............................... 17
EC DECLARATION OF INCORPORATION ......19
197/242