Electric Power Generation
DECLARATION of COMPLIANCE
related to CE marking
This Declaration applies to the generators designed to be incorporated into machines complying with the
Machine Directive Nr 2006/42/CE dated 17 May 2006.
MOTEURS LEROY-SOMER
Boulevard Marcellin Leroy
16015 ANGOULEME (France)
Declares hereby that the electric generators of the ranges " PARTNER", Industrial and Professional, as well as
their derivatives, manufactured by Leroy Somer or on Leroy Somer's behalf, comply with the following
International Standards and Directives :
- EN et CEI 60034 -1 et 60034 -5
- ISO 8528 – 3 “ Reciprocating internal combustion engine driven alternating current generating sets.
Part 3. Alternating current generators for generating sets ”
- The Low Voltage Directive Nr 2006/95/CE dated 12 December 2006.
Furthermore, these generators, designed in compliance with the Machine Directive Nr 2006/42, are therefore
able to be incorporated into Electrical Gen-Sets complying with the following International Standards and
Directives :
- The Machine Directive Nr 2006/42/CE dated 17 May 2006
- The EMC Directive Nr 2004/108/CE dated 15 December 2004, as intrinsic levels of emissions and
immunity are concerned
WARNING :
The here above mentioned generators should not be commissioned until the corresponding Gen-Sets have
been declared in compliance with the Directives Nr 2006/42/CE et 2004/108/CE, as well as with the other
relevant Directives.
Technical Managers
P Betge – O Cadel
4152 en – 12.2009 / c
To Next Page
Loading...
