Specifications of GENCOOL PC -26 coolant
Performance
GENCOOL PC -26 coolant is a ready-to-use cooling fluid which provides a high level of protection and is produced from an antifreeze
approved by the majority of manufacturers (Power Cooling concentrated antifreeze).
It offers the following:
- Improved anticorrosion: improves the effectiveness and service life of the cooling system.
- High temperature feature: promotes heat exchange.
- Long-term protection: against overheating and corrosion under extreme conditions of use.
- Compatible with the original fluid (however, it is recommended to drain the entire cooling system when replacing the fluid).
Specifications
Specifications Units Characteristics
Density at 20°C kg/m
3
1053 ± 3
pH pH 7.5 to 8.5
Alkalinity reserve ML ≥ 10
Boiling temperature °C 105 ± 2
Freezing temperature °C -26 ± 2
Typical values given for information purposes
To Next Page
Loading...
