Sea-doo 2004 3D RFI Shop Manual

Section 04 ENGINE (2-STROKE)
Subsection 07 (EXHAUST SYSTEM)
F22D0FA
– rotate left/right as shown
F22D0GA
– pull foam out
NOTE: If tuned pipe is still in place, firmly push
muffler rearward to disengage expansion pipe
from tuned pipe.
– pull out expansion pipe forward. Wiggle it to
disengage from muffler
F22D0HA
Muffler
Pull muffler out.
Inspect muffler, shell and boot condition.
Resonators
Upper Resonator
Remove strap no. 8,loosenclampsno. 9 then pull
out resonator no. 10.
F22D0AA
Lower Resonator
Loosen clamp no. 11 then pull out resonator
no. 12.
16 smr2004-3D
www.SeaDooManuals.net

Sea-doo 2004 3D RFI Specifications

General

Brand	Sea-doo
Model	2004 3D RFI
Category	Boat
Language	English