Secutron MR-2300T

73
11.3.7 Command Menu/MR-2300 Config -->Opt Zone Label
Use the buttons described below for entering messages. These buttons are alternate functions
of bypass switches and are physically located in the same position as described below.
Command Menu/MR-2300 Config/Ipt. Zone Label
1.Initiating zone label
|
|
|
12.
[Zone-1 ]->Default
[Zone-12 ]->Default
BYPASS SWITCH TRANSLATION
KEY SEQ 1 2 3 4 KEY SEQ 1 2 3 4
--------------------------------------
Zone-1 0 Q Z Zone-2 1
Zone-3 2 A B C Zone-4 3 D E F
Zone-5 4 G H I Zone-6 5 J K L
Zone-7 6 M N O Zone-8 7 P R S
Zone-9 8 T U V Zone-10 9 W X Y
Zone-11 Back Space Zone-12 Forward
Note: Refer to section 11.2.1 on page 64 for detailed instructions on making menu
selections.
Command Menu/MR-2300 Config/Opt. Zone Label
Zone-1 Label
Zone-1
Zone-12 Label
Zone-12
i
1 NAC-1
2 NAC-2
3 NAC-3
4 NAC-4
Indicating Zone