EasyManua.ls Logo

Sennheiser ADN C1 - Page 103

Sennheiser ADN C1
169 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Using the “Conference Manager” software
102 | ADN Digital Conference System
Loading a configuration
In the menu bar, click “Global Menu” > “Open Conference”.
The “Open” window appears.
If the software is connected to a central unit (see page 100), you can load three
types of configurations:
Loading a configuration ... Actions
... of an active (running) con-
ference (“Active Conference
Document”)
To load your configuration in “Live“
*
operating
mode:
Select theOpen Active Conference Document
from CU” option button.
Click “OK”.
To select the operating mode (“Setup”
**
or
“Live”) in which the configuration is to be loaded:
Select the “Open Conference Document from
CU” option button.
Select the configuration of an active confer-
ence (marked with an asterisk “*”) from the
drop-down list.
Select the operating mode (“Setup” or
“Live”) and click “OK”.
* After loading a configuration, the conference automatically starts in “Live” operating
mode. Also observe the information on page 103.
** In “Setup” operating mode, you can adapt existing configurations to your needs.
... of a non-active conference
(“Conference Document”)
To select the operating mode (“Setup” or “Live”)
in which the configuration is to be loaded:
Select the “Open Conference Document from
CU” option button.
Select the configuration of a non-active con-
ference (not marked with an asterisk “*”)
from the drop-down list).
Select the operating mode (“Setup” or
“Live”) and click “OK”.
... of a conference saved locally
on the hard disk (Open Local
Conference Document”)
***
*** Only available if you are using the Windows version of the software – even if there is no
connection to a central unit
Select the “Open Local Conference Document
option button.
Click “OK” and select the desired configura-
tion from the “Open Conference” file selection
dialog box (file extension “*.adn”).
Click “OK”.
The conference is loaded in “Setup” operating
mode.
If you open a configuration in “Setup” operating mode, the password set
will be prompted (where applies) (see page 98).

Table of Contents

Other manuals for Sennheiser ADN C1

Related product manuals