Sharp DV-RW270S - Commercial Skip; Locating a Specific Scene

33
GB
Commercial skip / Locating a specific scene
Commercial skip
Use this function to skip commercials while you playback.
Press CM SKIP during playback.
The time jumps to a point approx. 30 seconds later and playback re-
sumes.
NOTE:
With some DVD-Video, the Commercial skip operation may not work.
Locating a specific scene
Specify the time recorded on the disc, chapter or title to playback.
1
Press PLAY MODE/REPEAT.
The play mode screen will appear.
2
Press
or to select “TIME SEARCH”, “CHAPTER SEARCH”
or “TITLE SEARCH”, and press ENTER.
TIME SEARCH: Input the time to be played back.
CHAPTER SEARCH:
Select the chapter number to be played back.
TITLE SEARCH: Select the title number to be played back.
The screen above shows the display when “CHAPTER SEARCH”
is selected.
3
When selecting “TIME SEARCH”, input the time to be played back
with
/ / / or the numeric keys. When selecting “CHAP-
TER SEARCH” or “TITLE SEARCH”, press
or to select the
chapter number or title number.
4
Press ENTER.
The playback starts at the point you selected.
NOTE:
For “REPEAT”, see “Title, Chapter repeat playback” (page 34).
NOTES:
•You cannot switch to VCR mode
when the play mode screen is
showing. Press PLAY MODE/RE-
PEAT to clear the play mode
screen, then press DVD/VCR to
switch to VCR mode.
• Due to different specifications on
DVD disc, “CHAPTER SEARCH”
and “TITLE SEARCH” may not
work in some discs.
TV/VIDEO
TIME
SEARCH
CHAPTER
SEARCH
TITLE
SEARCH
REPEAT
TIME
SEARCH
CHAPTER
SEARCH
TITLE
SEARCH
REPEAT
CHAPTER 1
CHAPTER 2
CHAPTER 3