Sharp LC-30AD1E User Manual

49
3
Press DTV MENU to display the DTV Menu
screen.
1
2
Press a/b to select “Installation”, and then
press OK.
Press the GREEN button to display the Setup
menu.
System software
Displays System Software version information.
4
Press a/b to select “System software”, and
then press OK.
Guide Setup Preference
Service lists
System setting
Installation
Access restrictions
Country
Service scan
Reinstall all services
System software
System software
V1.0
Basic adjustment settings (Digital)
3
Press DTV MENU to display the DTV Menu
screen.
1
2
Press a/b to select “Installation”, and then
press OK.
Press the GREEN button to display the Setup
menu.
Country
Select the country where you are located.
4
Press a/b to select “Country”, and then
press OK.
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
• See page 84 for setting PIN.
5
Press a/b to select the country where you
are located, and then press OK.
Guide Setup Preference
Service lists
System setting
Installation
Access restrictions
Country
Service scan
Reinstall all services
System software
Country
fin
esp
fra
gbr
grc
NOTE
The following information is supported by selecting country:
• The logical channel numbering.
• The frequency band to be scanned during service scan.
• The maturity rating settings to be used.
• The time zone to be used.
• The daylight saving time period to be used.
LC-30AD1E(E)-d 03.10.31, 1:21 PM49

Sharp LC-30AD1E Specifications

General

Brand	Sharp
Model	LC-30AD1E
Category	LCD TV
Language	English