75
Useful adjustment settings
Colour system setting (for TV/AV
input mode)
You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
• Option menu displays.
Press a/b to select “Colour System”, and
then press OK.
MENU
[
Option
...
Colour System
]
Option
Audio Out
Input Label
Input Select
Cool Climate
Colour System
[On]
[Fixed]
[AUTO]
Press a/b to select a compatible video
signal system of your equipment, and then
press OK.
• Some items may be greyed out. They are not
selectable.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• This function is available for AV input mode and TV tuner
mode.
AV mode selection
AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.
AV MODE: STANDARD AV MODE: DYNAMIC
AV MODE: MOVIE
AV MODE: GAME
AV MODE: USER
AV MODE: STANDARD
AV MODE: USER
Press AV MODE again before the mode
displayed on the screen disappears.
• The mode changes as shown below.
2
Press AV MODE.
• Present AV mode displays.
1
AV input mode
PC input mode
Description
For a highly defined image in a normally
bright room
For a clear-cut image emphasising high
contrast for sports viewing
For a movie
Lowers image brightness for easier viewing.
Allows the user to customise settings as
desired. You can set the mode for each
input source.
Selected item
STANDARD
DYNAMIC
MOVIE
GAME
USER
LC-30AD1E(E)-h 03.10.31, 1:26 PM75
To Next Page
Loading...
Need help?
General
