84
PIN setting for child lock (for TV/DTV/
AV input mode)
Allows you to use a PIN to protect certain settings from
being accidentally changed.
Changing a PIN
You can change the factory preset PIN “1234” to
another 4-digit number you like.
Press MENU and the MENU screen displays.
1
2
3
Press a/b to select “Child Lock”, and then
press OK.
5
6
Enter the 4-digit number as a PIN using 0 –
9.
Press a/b to select “Change PIN”, and then
press OK.
Enter the same 4-digit number as in step 5
to confirm.
• “The system PIN has been changed
successfully” displays.
7
NOTE
• To view a locked channel (Lock setting in Programme
Setup “Manual” is set to “On”), you must enter a PIN. (See
page 32.) When you select a locked channel, a PIN prompt
message pops up. Press OK to display the PIN input
window.
Press c/d to select “Setup”.
• Setup menu displays.
Useful adjustment settings
Reset the PIN
Allows you to reset your PIN.
Press a/b to select “Child Lock”, and then
press OK.
Press a/b to select “Reset”, and then press
OK.
Press c/d to select “Yes”, and then press
OK.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
NOTE
• As a precautionary measure, make a note of your PIN
and keep it in a familiar place. If you lose or forget
your PIN, initialise the System to return all settings
except for the TV channel settings to factory preset
values. (See page 99.)
• This function is available for AV input mode and TV tuner
mode.
New PIN
–––
Reconfirm
––––
–
Change PIN
Reset
New PIN
–––
Reconfirm
––––
–
Change PIN
Reset
2
3
5
6
1
––––
4
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
––––
4
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
LC-30AD1E(E)-i 03.10.31, 1:28 PM84
To Next Page
Loading...
Need help?
General
