Sharp LC-30AD1E User Manual

73
Useful adjustment settings
Input signal source
Input selection
Can use for selecting the input source.
Press MENU and the MENU screen displays.
1
2
4
3
Press c/d to select “Option”.
• Option menu displays.
Press a/b to select “Input Select”, and then
press OK.
Press a/b/c/d to select a signal type you
want to set, and then press OK.
• If the selected signal type is incorrect, an image
does not display or no colour image displays.
MENU
[
Option
...
Input Select
]
Option
Audio Out
Input Select
Cool Climate
Colour System
[On]
[Fixed]
Input Label
[AUTO]
NOTE
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment
for the signal type.
MENU
[
Option
...
Input Select
]
RGBCVBS
MENU
[
Option
...
Input Select
]
CVBSY/C
MENU
[
Option
...
Input Select
]
AUTO
S-Video
Video
Press b on the remote control unit or
INPUT on the Display.
• INPUT SOURCE menu displays.
Press b on the remote control unit or
INPUT on the Display to select the input
source.
• An image from the selected source
automatically displays.
• You can also select the input source by
pressing a/b.
1
2
Input signal setting
For setting the signal type of external equipment.
MENU
[
Option
...
Input Select
]
COMPONENT
Y/C
CVBS
RGB
For INPUT 1 signal
For INPUT 2 signal
For INPUT 3 signal
For INPUT 4 signal
LC-30AD1E(E)-h 03.10.31, 1:26 PM73

Sharp LC-30AD1E Specifications

General

Brand	Sharp
Model	LC-30AD1E
Category	LCD TV
Language	English