59
Basic adjustment settings
Power control
Power Control setting allows you to reduce the display
brightness to save energy.
Press a/b to select “Power Save”, and then
press OK.
Press c/d to select the desired backlight
brightness, and then press OK.
3
4
NOTE
• When setting to “Auto”, the OPC indicator lights up green,
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure no object obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
Press c/d to select “Power control”.
• Power control menu displays.
Power control for AV source
Power save
When set to “Manual” or “Auto”, power consumption
is reduced by decreasing backlight brightness.
Press MENU and the MENU screen displays.
MENU
[
Power control
...
Power Save
]
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Manual]
Auto
Manual [+8] –8+8
1
2
LC-30AD1E(E)-f 03.10.31, 1:24 PM59
To Next Page
Loading...
