Sharp LC-30AD1E - Page 61

60
Basic adjustment settings
No Signal off
When set to “Enable”, the power will automatically shut
down if no signal inputs for 15 minutes.
Press a/b to select “No Signal Off”, and
then press OK.
Press c/d to select “Enable”, and then
press OK.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
• When a TV programme finishes, and the AVC System
receives signal input, this function may not operate.
Press c/d to select “Power control”.
• Power control menu displays.
2
Press MENU and the MENU screen displays.
1
MENU
[
Power control
...
No Signal Off
]
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Manual]
DisableEnable
No Operation off
When set to “Enable”, the power will automatically shut
down if there is no operation for 3 hours.
Press a/b to select “No Operation Off”, and
then press OK.
Press c/d to select “Enable”, and then
press OK.
3
4
• Five minutes before the power shuts down,
remaining time displays every minute.
NOTE
• “Disable” is factory preset value.
Press c/d to select “Power control”.
• Power control menu displays.
2
Press MENU and the MENU screen displays.
1
MENU
[
Power control
...
No Operation Off
]
Power control Setup
No Signal Off
Power Save
No Operation Off [Disable]
[Disable]
[Manual]
DisableEnable
LC-30AD1E(E)-f 03.10.31, 1:24 PM60