1-132
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
Saddle stitch unit
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
Before starting this procedure, remove all output from the output tray of the saddle stitch finisher (50-sheet stapling). Do
not replace removed output back in the output tray.
10
Push in the staple unit.
11
Close the cover.
1
Open the cover.
2
Pull out the unit.
Slowly pull out the unit until it stops.
To Next Page
Loading...
