Sharp MX-M905

2-126
COPIER►OTHER FUNCTIONS
Tab copying with a right binding
Originals Placing the originals Loading tab paper
Bypass tray (on the machine)
Large capacity trays
Tray 4
Bypass tray
(on the large capacity trays)
Tab Copy must be specified before scanning the original.
To change the default image shift width for tab copying:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Initial Tab Copy Setting].
The factory default setting is 1/2" (10 mm).
1
Tap the [Others] key, and tap the [Tab Copy] key.
2
Tap the [On] key.
1
Originals
Final image
1
Document feeder tray
Insert the originals so that the
side with no tab text enters first.
Side 1
Place the first sheet of tab paper
so that the tab faces toward you.
Place the first sheet of tab paper
so that the tab faces toward you.
Side 1
Place the first sheet of tab paper
so that the tab faces toward you.
Side 2
Place the first sheet of tab paper
so that the tab faces toward you.
Side 1
1
Document glass
Place the originals so that the side
with the tab text is on the left.