Sharp MX-M905 - Page 755

8-20
SYSTEM SETTINGS►SETTING MODE LIST
• Receive Line Select No Yes
- Internet Fax
Enabled
No Yes
-Fax
Enabled
No Yes
• Sender Address Setting Forward All Received Data No Yes
 Forwarding Destination Settings for Received Data No Yes
• Forward Condition 1 to 3 No Yes
- Forward Condition No Forwarding No Yes
- Day of the Week All Invalid No Yes
- Set Forwarding Time
Disabled
No Yes
- Start Time 00 Hour 00 Minute No Yes
- Completing Time 00 Hour 00 Minute No Yes
- Format for Forwarding TIFF(Multi) No Yes
X Sender Address Registration – No Yes
X Administration Settings No Yes
 Inbound Routing Settings No Yes
• Inbound Routing Disabled No Yes
• Disable Registration of Forward Table Disabled No Yes
• Disable Change/Delete of Forward Table Disabled No Yes
• Disabling of Forward Condition Change Disabled No Yes
• Print Style Setting Print at Error No Yes
 File Name Setting No Yes
• Preset of Character No Yes
- Character 1, 2
–
No Yes
- File Naming No Yes
+No.1 Sender Name No Yes
+No.2 Date & Time No Yes
+No.3 None No Yes
+No.4 None No Yes
+No.5 None No Yes
+No.6 None No Yes
+No.7 None No Yes
+ If received from a contact registered in the
address book, sender's name is changed to
contact's name.
Disabled
No Yes
X Inbound Routing (Storage) Settings No Yes
 Settings for HDD Storing of Received Data No Yes
• Auto Storing of Received Data in HDD Disabled No Yes
• Specifying Data to be Stored No Yes
-Fax Disabled No Yes
- Internet Fax Disabled No Yes
Setup Items Factory default setting U A