1-77
BEFORE USING THE MACHINE►LOADING PAPER
6
Change the right paper guide to the
paper size to be used.
(1) While holding up the paper guide lock,
slide the paper guide to the paper size to
be used.
(2) Release the paper guide lock.
(3) Move the paper guide slightly to the right
and left so that it locks into place.
You will hear a "click" when the paper guide locks.
7
Set the paper size and paper type.
Be sure to set the paper size and paper type by selecting [Tray Settings] in the home screen or in "Settings", select
[System Settings] → [Common Settings] → [Paper Settings] → [Paper Tray Settings].
If the paper size setting is not configured correctly, automatic paper selection will not operate correctly and printing may
take place on the wrong size or type of paper or a misfeed may occur.
To Next Page
Loading...
