28
(5.6) Tuner
The built-in tuner allows you to quickly tune your instrument
using the intuitive and easy-to-read display.
While using the tuner, all input signals will be muted from
the outputs. Loop playback will continue to play back to the
outputs.
Tap the Input Select 1-4 buttons in the lower right corner,
or use the corresponding Track 1–4 pedals, to select which
audio inputs are muted from the outputs and sent to the
tuner. When an input is unselected, the audio will be sent
from the outputs as normal. This is useful in performance
situations where you would still like the ability to talk to your
crowd while tuning your muted guitar.
Tap the Pitch Reference and use the encoder to adjust the
tuning reference frequency. The default is 440 Hz.
To Next Page
Loading...
