40
(5.10.4) MIDI
MIDI Clock Receive: This setting determines whether Sheeran Looper X will sync to an external MIDI
clock source. Set to On to sync tempo to an external source, or set Off to disable.
MIDI Clock Source: This setting determines how Sheeran Looper X will receive MIDI clock messages.
Tap the field and then use the encoder to select the desired source. Select Looper X to receive MIDI
clock messages from the 5-pin MIDI Input on the rear panel. If you have a class-compliant MIDI device
connected to the USB Type-A Ports, select the device's name to set it as the MIDI clock source.
MIDI Clock Send: This setting determines whether Sheeran Looper X will send MIDI clock to an external
MIDI clock destination. Set to On to send MIDI clock to an external device, or set to Off to disable.
MIDI Clock Offset: This setting can be used to set an offset (-10 ms to 10 ms) for sent MIDI clock to an
external destination. This is sometimes needed to compensate for delays that are introduced by some
MIDI hardware. Tap this field and turn the encoder to choose a setting.
MIDI Clock Destination: This setting determines how Sheeran Looper X will send MIDI clock messages.
Tap the field and then use the encoder to select the desired destination. Select Looper X to send MIDI
clock messages from the 5-pin MIDI Output on the rear panel. If you have a class-compliant MIDI device
connected to the USB Type-A Ports, select the device's name to set it as the MIDI clock destination.
MIDI Thru: This setting determines the function of the MIDI Output. When set to On, MIDI sent to the
Sheeran Looper X MIDI Input will be sent directly to the MIDI Output. When set to Off, Sheeran Looper
X will only send its own MIDI information out of the MIDI output.
External MIDI Control: This setting determines whether Sheeran Looper X will respond to incoming
MIDI CC and MIDI Note messages. When set to On, Sheeran Looper X will receive MIDI CC and MIDI
Note messages from an external device on the selected channel. When set to Off, Sheeran Looper X
ignore incoming MIDI CC and MIDI Note messages.
External MIDI Channel: This setting determines which channel that Sheeran Looper X will listen to
when set to respond to incoming MIDI CC and MIDI Note messages. To change the MIDI Channel, tap
the field and then turn the encoder to select the channel, 1–16 or Omni (all channels).
See the following (6.2) Other Functions > External MIDI Control chapter for more information.
To Next Page
Loading...
